How to replace car control arms (VIDEO)

• Control arms are mechanical components housed in the suspension system of a vehicle.
• Their function is to keep the body and wheels stable during the car’s movement.
• Experts explain in a video how to easily replace them.

Control arms, or ARMs, are mechanical pieces housed in the suspension system of any vehicle, and now we will show you the replacement process.

Experts in automotive mechanics explain that control arms have the function of keeping the body and wheels of the car stable.

Therefore, they are not common pieces; they are part of an entire anchoring system that ensures the car moves in a straight line.

But before you continue reading, we invite you to listen to the new podcast Astrology, Horoscopes and more, CLICK HERE.

To listen to the podcast click on the image

That jolt is a clear sign that there is a failure in the control arms, which is affecting the operation of the suspension system.

If the anomaly is not repaired in time, it could cause severe damage to the tires and trigger a possible traffic accident on the road.

And all of that is caused only by the lack of inspection and maintenance.

That is why the mechanics’ advice comes in when they suggest regularly checking the entire suspension system.

What is needed to change the control arms?

You need to explore the proper functioning of the bushings and ball joints, vital components found in the ARMs.

From the Atlanta SUV workshops, experts explain in simple steps how to change the control arms and avoid a headache in the future.

But first, you should know that if you want to change the control arm bushings, you will need a jack to lift the vehicle.

The bushings are located under the cars, and you can access them and replace them with a socket wrench.

Step-by-step to change the control arms

Before you start, make sure you have all the necessary tools, including jacks, supports, wrenches, and possibly a stabilizer bar.

Also, it is crucial to work in a flat and safe area, with the car supported stably.

Locate the control arms that need to be replaced. These are crucial components of the suspension and are generally found at the front or rear of the vehicle, connecting the chassis to the wheels.

Lift the car with a hydraulic jack and secure it with supports to ensure safety during the process. Make sure to follow the manufacturer’s instructions to find the appropriate lifting points.

Wheel Removal

Remove the car’s wheels to get a clear view of the control arms. This will facilitate the removal and installation process.

Use the right tools to loosen and remove the bolts holding the control arms. You may need a ball joint extractor or special tools depending on the design of the suspension system.

Place the new control arms in place and secure them with the corresponding bolts. Tighten the bolts according to the manufacturer’s specifications.

Verification and Alignment

Once the new control arms are installed, reassemble the wheels and lower the car. Perform a visual check to ensure everything is correctly installed.

Subsequently, it is advisable to perform an alignment to ensure optimal handling and prevent premature tire wear.

Take a test drive to assess the car’s behavior.

Pay attention to any vibrations, unusual noises, or steering problems. If necessary, make additional adjustments.